1. Put the small, red switch (the DC-switch) at the left bottom side of the inverter on ‘0’ to switch off the inverter.
2. Switch off the solar panel group in the switchboard or at the separate PV-divider (if present), by turning the switch down.
3. Wait for about 5 minutes.
4. Switch the solar panel group in the switchboard or at the separate PV-divider back on
5. Put the red switch at the left bottom side of the inverter back on ‘1’.
Please keep in mind that it could take a while (up to an hour) before the reset is effective and data is transmitted again |