1. Turn the black DC-switch at the bottom left of the inverter a quarter turn towards the left, to ‘OFF’.

2. Switch off the solar panel group in the switchboard or at the separate PV-divider (if present), by turning the switch down.

3. Wait until all lights on the inverter have gone out.

4. Are all lights switched off? Then turn the black DC-switch at the bottom left of the inverter a quarter turn towards the right, to ON’.

5. Afterwards, switch the solar panel group in the switchboard back on.



Please keep in mind that it could take a while (up to an hour) before the reset is effective and data is transmitted again